sprinkler spring start ups

Sprinkler Spring Start Ups

It’s time to start thinking about your sprinkler system as the weather warms up and spring arrives.  If you have a Sprinkler Spring Startup service performed by a professional, they will come out and inspect your system, make any necessary repairs, and get it ready for the season.  This is crucial because it guarantees that your system is functioning properly and that your yard remains healthy and green throughout the summer.

If you’re not sure when the last time your sprinkler system was serviced, it’s a good idea to have it done now. This way, you can be sure that it’s ready to go when the warm weather hits. Sprinkler Spring Start Ups are important to keep your system running smoothly and help to prevent any problems from occurring later on. Questions, call (972) 379-7175.

What is A Lawn Spring Sprinkler Start Up?

It is the opening of your lawn sprinkler system after it has been shut off for the winter months. The technician will slowly open the supply valves, run the water, and inspect the lateral lines, backflow devices, and valve manifold looking for leaks or damage during spring start up. They will also inspect all sprinkler heads for correct spray direction and coverage, as well as drip irrigation lines and emitters. Spring Sprinkler start up experts will also reprogram the irrigation controller for correct spring settings and watering times.

Best Time to Have Your Sprinkler Spring Start Ups

Spring Start up occurs in the months of March, April, and May. Texas Sprinkler Repair experts provide services to reset the control time for the best Spring season you can have. All drain valves and plugs will be closed, shut-off valves will be reopened, leaks will be checked, and sprinkler heads will be adjusted and cleaned.

To ensure that your grass, shrubs, and flowers receive water immediately after planting, we recommend having your spring start up finished before you have landscaping and plantings installed.

Is it possible to do your own Sprinkler Spring Start Ups?

The common misconception of the homeowners is that sprinkler spring start up was just like turning on a valve. But it is not right, an expert in irrigation should be the one opening the supply valves, and the water remains. Failing to do so might result in a lot of damage to the valves or other lines. It is always important to seek advice from an expert so that you can have a well-flowing spring season. 

The Spring Start Up Guide

When the weather warms up and the snow melts, it’s time to reactivate irrigation systems and resume watering. However, you must take a few crucial precautions to avoid damaging pipes or irrigation components while doing so. Hiring a professional contractor is usually a good idea. Below is the spring start-up guide to assist you in getting your sprinkler system up and running quickly.

  1. To allow pipe sections to fill with water gradually, open the system main water valve gently. Sprinkler main lines are put under high surge pressures, uncontrolled flow, and water hammer when these valves are opened too fast.
  2. Verify that each station valve is in good working order by manually turning on all zones from the controller.
  3. Check each zone on the controller to ensure that it is operating properly. Check for correct pressure (low pressure suggests a line break or a sprinkler that isn’t working), sprinkler head rotation and adjustment, and coverage. On poorly performing sprinklers, inspect and clean the filters. Adjust heads to grade as necessary.
  4. Re-program the controller to turn on and off automatically. If required, replace the backup battery in the controller.
  5. Uncover and clean the system weather sensor, if necessary. 

Finding the Right Expert

It is crucial to have a professional perform the sprinkler start up in order for it to function properly. An expert can evaluate which sprinkler valves are broken and whether the solenoid is malfunctioning, causing water to stream continuously and increasing your water cost.

When looking for a Sprinkler Spring Startup service, be sure to choose a reputable company that has years of experience. The professionals at Sprinkler Repair of Texas have been providing quality service for years and are experts in all things related to sprinklers. We’re here to help you get your system up and running again so that you can enjoy a beautiful lawn all season long. 

Sprinkler Repair of Texas, is an irrigation service company established in Texas. They serve the cities of Arlington, Dallas, Fort Worth, and San Antonio. Our skilled and experienced sprinkler repair professionals will evaluate and resolve your needs and any issues you have. 

We ensure that your irrigation repairs are handled by trained and experienced technicians. Give us a call (972) 379-7175 today or book an appointment. We will be glad to assist you in your sprinkler repair and start up needs.